EMP VOLTERRA / Technology
Molicel M65A. The cell behind VOLTERRA.
Both VOLTERRA configurations are designed around 80 Molicel INR-21700-M65A cells. The same cell count supports two different voltage and capacity combinations.
Manufacturer cell data / finished-pack validation pending
80 cells in each VOLTERRA configuration.
Manufacturer cell ratings
- Manufacturer / model
- Molicel INR-21700-M65A
- Format
- 21700 cylindrical lithium-ion
- Typical capacity
- 6,500mAh
- Minimum capacity
- 6,400mAh
- Nominal voltage
- 3.6V
- Charge voltage
- 4.2V
- Continuous discharge
- 26A with a 90°C cell-surface cutoff condition
Source: Molicel product datasheet, version 0.1 dated August 5, 2025. These are cell specifications, not validated VOLTERRA pack ratings.
VOLTERRA 60: 16S5P
Sixteen groups are connected in series, with five cells in parallel per group. That gives 80 cells, a nominal 57.6V and a typical calculated capacity of 32.5Ah. The product is marketed as 60V class.
VOLTERRA 72: 20S4P
Twenty groups are connected in series, with four cells in parallel per group. That gives 80 cells, a nominal 72V and a typical calculated capacity of 26Ah.
Calculated from typical cell ratings
The same nominal energy
Each configuration works out to approximately 1,872Wh using typical cell capacity. Changing the series/parallel arrangement changes voltage and amp-hours while preserving the same calculated cell energy.
These figures are derived from cell ratings. Finished-pack capacity, usable energy and continuous output require validation.
Manufacturer documents
Review the manufacturer’s complete conditions and specifications.