EMP VOLTERRA / Technology

Thermal protection. A system-level approach.

The VOLTERRA design calls for multiple battery temperature sensors and BMS protection behavior evaluated in the complete assembly.

Development information / final specifications pending validation

Multiple Planned temperature sensors

Final quantity, placement and protection settings are pending.

Monitoring the battery

Temperature readings help the battery management system identify conditions that may require a change in charge or discharge operation. The planned design includes multiple sensors; their final quantity, locations and supported readings remain to be confirmed.

A cell’s datasheet limits are not a substitute for validation of the full battery, connections, BMS and enclosure.

BMS protection behavior

The final system will require verified temperature thresholds, delays, recovery conditions and behavior during charging and discharge. These settings will be documented after production hardware selection and testing.

Monitoring data shown in an app depends on the sensors and parameters supported by the selected BMS.

Validation items

Sensor quantity and placement
Final assembly specification pending
Charging temperature limits
BMS configuration and testing pending
Discharge temperature limits
BMS configuration and testing pending
Shutdown and recovery behavior
System testing pending
App temperature displays
Supplier confirmation pending
100A continuous output
Development target; thermal and system validation pending

Pack validation pending

What testing must establish

System-level testing needs to evaluate heat generated by cells, wiring, BMS and connections under the intended operating conditions. Final continuous-current claims will depend on those results.

VOLTERRA is not being advertised with an untested waterproofing claim or IP rating.

Published specifications

Confirmed production sensor information, temperature limits and protection behavior will replace the pending items on this page as validation is completed.