Bafang Y-splitter 1T2 Cable For Gear Sensor

$10.00

Quantity
  • Product Description

      BAFANG Y-SPLITTER 1T2 Cable For Gear Sensor BAFANG Brake Lever BBS01 BBS02B BBSHD BAFANG Gear Sensor 1T2 Cable Motor Kits

      • Three Pin Yellow Waterproof Connector 
      • Compatible: BAFANG BBS01 BBS02 BBSHD
      • Y-SPLITTER 1T2 Cable For BAFANG Gear Sensor
      • BAFANG 1T2 Cable For Shift Sensor
      • Cable Lenth:20.5cm
  • Reviews

  • Battery Intake Form

    • Please print this page and send it to RPE with any battery for rebuild quote.

      INSTRUCTIONS FOR SHIPPING: Please send the BATTERY, CHARGER, and key (if needed to power battery on) in a corrugate box. Bubble wrap the battery and secure it so it won't move during transit. Please do not use packing peanuts. 

      Close your container securely and display the dangerous goods label that is provided on the outside of your package. Ship via GROUND, preferably with FedEx or UPS. We will send you a quote/invoice after receiving your battery.

      You do not have to fill everything out below 

       Name:________________________________________________________________________________________________________________

      Phone:________________________________________________________________________________________________________________

      Email:_________________________________________________________________________________________________________________

      Street:________________________________________________________________________________________________________________

      City, State, ZIP:________________________________________

       

      Ebike Information

      Make/Model/Year: __________________________________________

      Wattage of motor:__________________________________

       

      Battery Information

      Brand/Manufacturer: ______________________________________________

      Voltage (May be a range) ______________________________

      Watt-hours or Amp-hours (Wh or Ah) ____________________________

      Description of Problem­­­­­­­­­­­_________________________________________________________________________________________________________

      ____________________________________________________________________________________________________________________________________

       

      Are you interested in a capacity (Ah) upgrade for longer range, if possible? ­­­­­­­­­__________________________________________________________________

      Are you interested in a faster charger?

      ___________________________________

       

      ATTACH THIS DANGEROUS GOODS LABEL TO SHIPMENT

       

       

      Send Ground To:
      Ebike Market Place
      6585 South Arville Street, Suite A
      Las Vegas, Nevada 89118
  • E-bike Battery Replacement, Repair, Rebuild

    • Call ebikemarketplace to get a quote for any ebike Battery Rebuild 888-456-9410

      Need to replace an electric bike battery for a discontinued model or a company that is out of business? Is your battery no longer covered under warranty and needs some maintenance? Send all your old e-bike batteries to our location and we can make them work like the first day you purchased them!!! Upgrading is our specialty! We can often fit in higher energy batteries to give your pack more range so you can ride longer distances. Don't have an e-bike? That's ok too, we do batteries for any light electric vehicle (LEV). For all of your other battery needs, visit our parent company Rechargeable Power Energy. The process is simple: contact us with pictures of your current e-bike battery and we will reply with a estimated initial quote. Once you agree to the estimate send in the battery to our store location and we will start the diagnosis process and inform you of all the available options.

       CLICK HERE FOR THE BATTERY INTAKE FORM 

      Step by step process for all battery rebuilds

      1. Contact RPE at 888-456-9410 and speak with a tech about pricing estimates and the proper way to ship the battery to our location.
      2. Send the battery to 6585 Arville St STE A, Las Vegas, NV 89118 using our battery intake form that has a dangerous goods sticker explaining the shipping process.
      3. Once we received the battery we will visually inspect the battery for shipping damage (Photos will be taken)
      4. We find out the best cells that can fit into the case and call the customer back for information in regard to capacity. We typically can increase the capacity by 2-4 amps!!!!
      5. We check your battery to see if is still working at all, this includes the OEM Battery Management system inside as well as Fuses and connectors. Some of these batteries are really old so the connectors some times can be the only issue so we check to see if we can save the battery right away. 
      6. We start testing the cells that will be used inside of your battery. We test your charger with out your battery.
      7. We test the BMS with out the cells first and we determine if it needs parts or not. 
      8. Next we install the new tested cells with the OEM Battery management system. 
      9. Finally we test the full battery with a load and a generic motor to make sure it works well with a controller. We also test your new battery with you existing charger (Make sure you always send us the charger)
      10. Ship The battery back to the customer with a thank you email!!!!!

      Reason why it may take longer to get you battery back

      1. The Original Battery management system is no longer working properly. if this is the case we may have to special order new parts to get the BMS working again. Then after we received the parts we put the battery through hard testing to ensure the battery can be able to fit our warranty demands. (all rebuild batteries have a 1 year warranty)
      2. We need to order high performance cells to fit you stronger american standard motors. In america most motors go up to 750W and higher but any battery you buy from china may not be able to handle that high load unless specified.
      3. The case is damaged and needs to be repaired.
      4. The connectors need to be replaced, this normally doesn't take long to do but what if you have special connectors? Ebikemarkepace wants to make sure each and ever battery is user friendly so we ensure you don't have to go out and do any extra work to ride you ebike.
      5. The charger is broken so we have to use our charger and update the connector so it works with your rebuild battery. 
      6. The battery demand is very HIGH!!! 
      7. The engineers need more time understanding your full system and want to ensure your safety buy properly testing ( Cycle testing ) . 

      IMPORTANT SAFETY INSTRUCTIONS AND WARNINGS For LI-ION/POLYMER BATTERIES

      • You must read these safety instructions and warnings before using or charging your batteries.
      • Lithium Polymer and Li-ion batteries are volatile. Failure to read and follow the below instructions may result in fire, personal injury and damage to property if charged or used improperly.
      • Li-Ion and Polymer battery & packs may explode and cause fire if misuse or defective. We require all Li-ion batteries & packs buyers must be professionals and have capability to handle emergency.
      • When charging Battery Pack, please put battery in a fire proof container. Please don't leave battery pack and charger on the wood material or carpet and unattended.
      • Must keep Li-Ion & Polymer battery pack away from children.
      • Never make wrong polarity connection when charging and discharging battery packs. Always double check polarity of battery's connector to make sure red wire to red wire and black wire to black wire.
      • Lithium batteries has it's cycle life, please replace old battery with new one when it reaches it's service life or when it is two year old, whichever comes first.
      • By purchasing Lithium Polymer and Li-ion battery, the buyer assumes all risks associated with lithium batteries. If you do not agree with these conditions, please consider all EMP batteries to be returned the battery immediately before use.

      For more information in in terms of safety visit or Safety & Warranty Page

      Click here

       

      Here is a list of some of the latest e bike batteries we have rebuilt:

      If your bike brand isn't on the list, don't worry! We'll still take a look at it and support it if we can. Just send us the battery and charger with our Battery Intake Form and we'll send you a quote. Once we have the battery in our possession we work toward the rebuilding the battery and send out a time frame for the rebuild. ***Note some batteries may take up to 3 -4 weeks if we have to order special cells or replace parts on the original battery management system in order to ensure the battery works correctly.If there is any problems at all for the battery rebuild you can contact us directly here at 888-456-9410. Check Video below for more details regarding the full process......

       

       

      **** All Battery Rebuilds are American Supported with a 1 year warranty ****

  • EMP Battery User Guide / Safety Information & Warranty

    • Warranty - 1 year Battery Retail ----- 6 months for commercial Use 

      • Does not cover  damage to the battery cell caused by drops, punctured cells, torn shrink wrap, open battery case. 
      • Warranty on only total battery failure not  covered if reduction in performance is not covered by warranty. 
      • Any change to the original programming of the motor or battery will void the warranty.
      • Product warranty is limited to original defects in material and workmanship. Warranty does not cover collateral damage. Misuse, abuse, incorrect charging and other inappropriate use of this product are not covered under warranty.
      • Battery warranty covers performance decrease to below 80% of original capacity.
      • Warranty only covers work done by RPE. Warranty does not cover existing wiring, pins, connections, plugs, battery management systems, and the like not replaced by RPE.
      • Warranty is non-transferable and covers the original purchaser only, unless sold by an authorized RPE / EMP dealer.

      Battery Charging process & Tips

      The RPE battery can be also charged through the Anderson connectors for high current charge but for the standard low current options please use the barrel connector. The RPE Charger Scheme should match these colors, do not mix match the color as it could cause harm to the battery. It is recommend that you use the EMP Low current charger; if not do not exceed 7 amps of charger current or you will risk damaging the barrel connectors charging wire.Never charge batteries unattended.

      • For added safety put battery in the fireproof container and charge in an isolated area, away from other flammable materials. Always have fire extinguisher for emergency use.
      • Let battery cool down to ambient temperature before charging.
      • Do not charge batteries packs in series. Charge each battery pack individually. Failure to do so may result in incorrect battery recognition and charging functions. Overcharging may occur and fire may be the result.
      • You must select the charge rate current that does not exceed the battery's allowed charging current. (Please double check the battery's specification)

      Voltage Ranges

      This chart will explain the ranges of your Naked RPE battery to expect from the battery cells anything lower or higher than these is a good indication that your battery is potentially damaged

      Nominal Voltage System

      Minimum Battery Voltage

      Maximum Battery Voltage

      24 volt system (LIFEPO4 Chemistry)

      21 volts (16v)

      29 volts  (29v)

      36 volt system (LIFEPO4 Chemistry)

      30 volts (22v)

      42 volts (40v)

      48 volt system (LIFEPO4 Chemistry)

      39 volts (30v)

      54 volts (54)

      52 volt system (LIFEPO4 Chemistry)

      42 volts (32v)

      58 volts (58v)

      IMPORTANT SAFETY INSTRUCTIONS AND WARNINGS  BATTERIES

      • Dropping battery (the battery is tested in a drop test of 6 feet to still perform but is highly unpredictable afterwards)
      • Do not open/cut the protective shrink wrap around the battery back, in doing so will void the 1 year warranty (Please see RPE Naked Warranty for more information)
      • Avoid Extreme Temperatures– Extreme temperature conditions put stress on lithium batteries. Exposure to extreme temperatures may result in irreversible decreased capacity and cycle life.
      • Recommended storage temperatures are 32F – 77F.Avoid exposing the battery to extreme heat, 104F+ for long periods of time. Avoid humidity store the battery and charger in a location that is dry.
      • Never charger a battery directly after use wait at least 30 mins before using a battery after applied load
      • Never charge a battery if battery has been dropped 
      • Never make wrong polarity connection when charging and discharging battery packs. Always double check polarity of battery's connector to make sure red wire to red wire and black wire to black wire.
      • Do not mix and use old batteries and new batteries, or batteries with different brand names.
      • For larger battery pack ( 10Ah or larger ) , please always use a smart charger with temperature sensor to avoid over heating which may cause the accident.
      • Suggest you charging all EMP batteries and packs at least every three months, otherwise batteries will reduce capacity or die completely . For safety reason, we usually ship EMP batteries without fully charged. You must allow charging the EMP battery before use, and allow 3-5 cycles of charging and discharging for battery capacity to recovered.
      • All Batteries must not be used if they are dropped or looks expanded 

      EMP Drop Test on our batteries!!

       

      AGREEMENT

      • Please realize that batteries might cause damages like leaking, fire or explode when misuse or defective.
      • It is your responsibility to double check and make sure your devices have necessary protection circuits.
      • When charging Battery Pack, please put battery in a fire proof container. Always charge in an isolated area, away from other flammable materials. Ex: wood bench, carpet unattended.
      • We are only responsible for the products we sell if the battery is not use correctly as we instructed. We are NOT responsible for any damages and consequences damages by using our products if used improperly.

      IMPORTANT SAFETY INSTRUCTIONS AND WARNINGS For LI-ION/POLYMER BATTERIES

      • You must read these safety instructions and warnings before using or charging your batteries.
      • Lithium Polymer and Li-ion batteries are volatile. Failure to read and follow the below instructions may result in fire, personal injury and damage to property if charged or used improperly.
      • By purchasing Lithium Polymer and Li-ion battery, the buyer assumes all risks associated with lithium batteries. If you do not agree with these conditions, please consider all EMP batteries to be returned the battery immediately before use.
      • Li-Ion and Polymer battery & packs may explode and cause fire if misuse or defective. We require all Li-ion batteries & packs buyers must be professionals and have capability to handle emergency.
      • When charging Battery Pack, please put battery in a fire proof container. Please don't leave battery pack and charger on the wood material or carpet and unattended.
      • Must keep Li-Ion & Polymer battery pack away from children.
      • Never make wrong polarity connection when charging and discharging battery packs. Always double check polarity of battery's connector to make sure red wire to red wire and black wire to black wire.
      • Do not mix and use old batteries and new batteries, or batteries with different brand names.
      • Lithium batteries has it's cycle life, please replace old battery with new one when it reaches it's service life or when it is two year old, whichever comes first.
      • Test battery properties is your own responsibility. Please test Li-Ion battery you bought from us before using or sell to your customer to ensure battery can be operated properly and safely in your device. 

      General Guidelines and Warnings

      • Use specific Lithium Polymer/Li-ion charger only. Do not use a NiMH or NiCd charger- Failure to do so may a cause fire, which may result in personal injury and property damage.
      • Never charge batteries unattendedWhen charging LiPo/Li-ion batteries you should always remain in constant observation to monitor the charging process and react to potential problems that may occur.
      • Some LiPo/Li-ion chargers on the market may have technical deficiencies that may cause it to charge the LiPo/Li-ion batteries incorrectly or at an improper rate. It is your responsibility solely to assure the charger you purchased works properly. Always monitor charging process to assure batteries are being charged properly. Failure to do so may result in fire.
      • as rings on your hand), severe injuries may occur due to the conductibility of electric current.
      • A battery can still ignite even after 10 minutes.
      • In the event of a crash due to bad shipment or other reason, you must remove battery for observation and place in a safe open area away from any combustible material for approximately 15 minutes.
      • If for any reason you need to cut the terminal wires, it will be necessary to cut each wire separately, ensuring the wires to not touch each other or a short may occur, potentially causing a fire.
      • To solder a connector: Remove insulating tape of Red wire and solder to positive terminal of a connector, then remove insulating tape of Black wire and solder to the negative terminal of connector. Be careful not to short the wire lead. If you accidentally cause the battery to short, place it in a safe open space and observe the battery for approximately 15 minutes. A battery may swell or even possibly catch fire after a short time.
      • Never store or charge battery pack inside your car in extreme temperatures, since extreme temperature could ignite fire.
      • Never drop the batteries.
      • We suggest you put the battery in an enclosure to protect it from damages by liquid or dropping from height accidentally.

      Storage & Transportation

      • Store battery at room temperature between 40 and 80 degrees F for best results.
      • Do not expose battery pack to direct sunlight (heat) for extended periods.
      • When transporting or temporarily storing in a vehicle, temperature range should be greater than 20 degrees F but no more than 150 degrees F.
      • Storing battery at temperatures greater than 170 degrees F for extended periods of time (more than 2 hours) may cause damage to battery and possible fire.

      Charging and Typical maintenance 

      • Charge battery with good quality Lithium Polymer charger. A poor quality charger can be dangerous.
      • Set voltage and current correctly (failure to do so can cause fire).
      • Do not discharge battery to a level below 3V per cell under loadDeep discharge below 3V per cell can deteriorate battery performance.
      • Use caution to avoid puncture of the cell. Puncture of cells may cause a fire.
      • Charging the battery every 2 months to keep it fresh if you don't use it.
      • Let battery cool down to an ambient temperature before charging.
      • During discharge and handling of batteries, do not exceed 160 degree F.

       

      Ebikes & Bafang Motor Warranty

      Bikes are warrantied through the original OEM.

      Energie Cycles are warrantied through Ebikemarketplace.com.

      Bafang motors are covered under a limited warranty through Bafang NA.

      Warranties are for the original buyer and do not extend to secondary sales.

      Ebikemarketplace.com will replace a Bafang motor up to one (1) time then it is up to the buyer to maintain the integrity of the motor and forward all continuing issues to Bafang NA per the Bafang warranty.

      1. This warranty does not apply to any motor where mechanical breakdown shows driver abuse.
      2. This warranty does not cover normal maintenance items.
      3. This warranty does not cover excessive use, misuse, or commercial use. 
      4. This warranty does not cover deterioration from wear or exposure.
      5. This warranty does not cover any defect caused by abuse, misuse, neglect, carelessness, or accident.
      6. This warranty does not cover any defect caused by alteration or modification of the bike, battery, and or motor.

       

       

  • Product Details

    • Variant: Default Title
    • SKU: 01-EB-GSYS
    • In Stock: 0
    • Weight: 2.0 lb
    • Product Type: Unknown Type
    • Brand: EbikeMarketplace